Water treatment
Clarification, softening and protection of water-circulation systems
Overview
Reagents for treating potable, process and recirculating water: coagulants and flocculants for clarification, antiscalants to protect heat-exchange equipment, biocides for microbiological control.
We tailor a water-treatment programme to your water composition — from primary clarification to stabilisation in a closed loop. Dosage is calculated by a process engineer based on the analysis.
Products
Products for the industry
SALUT К-12
Coagulant for clarifying drinking and process water across a wide pH range.
Open →SALUT Ф-40
Flocculant for thickening and dewatering sludge and beneficiation tailings.
Open →SALUT Ф-60К
Flocculant for dewatering organic sludge on belt presses.
Open →SALUT Б-220
Biofilm-dispersing biocide for cooling towers and paper machines.
Open →SALUT АН-30
Antiscalant for boilers and heating networks, threshold effect on calcium carbonate.
Open →SALUT АС-80
Antiscalant for reverse osmosis, high sulfate saturation index.
Open →SALUT К-30
Coagulant for water clarification and paper sizing, low impurity content.
Open →SALUT Ф-25А
Flocculant for clarifying circulating water and thickening fine suspensions.
Open →SALUT Б-330
Broad-spectrum biocide for circulating waters and paper-machine systems, low dosages.
Open →SALUT АН-55
Antiscalant for cooling towers and circulating systems, hardness stabilization.
Open →Case studies
−40% turbidity
Municipal treatment plant
Switching to the SALUT K-12 coagulant reduced residual turbidity and reagent consumption per tonne of water.
+30% service life
Plant recirculation loop
An antiscalant + biocide programme extended the between-cleaning run of the heat exchangers.
Figures are illustrative (demonstration data).
Consumption rates
| Task | Reagent | Indicative dosage |
|---|---|---|
| Surface water clarification | SALUT K-12 | 15–40 g/m³ |
| Boiler scale protection | SALUT IK-200 | 5–15 g/m³ |
| Microbiological control | SALUT DE-50 | 10–25 g/m³ |
Dosages are indicative. The exact rate is selected by a process engineer based on a medium analysis.
Reviews
“Consistent quality from batch to batch, and dosage was selected on site — no lengthy approvals.”
We will find a solution for “Water treatment”
Describe your task — a process engineer will calculate the dosage and prepare a commercial offer.